Sand dewatering screen should pay attention to some inspection and maintenance when it is used at ordinary times. The most basic inspection is to see whether the coarse mesh part and the fine mesh part are damaged. There will be rings on the screen. If these rings are not locked, they must be locked first and then applied to the equipment. In addition to these conditions, check whether other parts are damaged. For example, there are some circular vibrating screens with v-rings on them. If the parts are damaged, they should be repaired.
The reason to check whether these nets are damaged is because if there is damage, it will lead to material leakage. At this time, it will be very troublesome to rearrange the materials, which will also affect the eating and difficulty of materials. In addition to these, it is necessary to check whether there is noise when starting the equipment. If so, it indicates that some parts on the vibrating screen have problems. Then, check whether there is any problem with the current, such as whether it is stable.
In the process of use, we should know whether the vibration of the whole equipment is abnormal. In a word, if there are some problems in the vibrating screen itself during startup, these faults should be eliminated before restart. After use, you should also pay attention to clean up these things, not the next time you use them. In addition, when not in use, the equipment should be maintained as much as possible to ensure that the vibrating screen can be used for a long time.