Fine sand recovery machine can recover a large amount of fine sand lost by sand washing machine. It is widely used in sand aggregate processing system, glass raw material processing system, artificial sand production line, coarse slime recovery in coal preparation plant, environmental protection engineering and mud purification, etc. The tailing cyclone of fine sand recovery machine plays a key role in dewatering, demineralization, desliming and recovery of fine sand for slurry materials. It not only improves economic benefits, but also reduces the treatment cost of tailings and the environmental pollution and damage caused by the loss of fine sand.
The tailings cyclone is usually used behind the thickener. Its structure is the same as that of the conventional cyclone. The main body is connected by a hollow cylinder and a cone. The feeding concentration of tailings cyclone is high (about 40%). The particle size of tailings is usually fine, and the classification of tailings requires a large ore feeding pressure. Many researches and practices show that the higher the concentration of hydrocyclone is, the higher the feeding pressure of hydrocyclone is, the greater the abrasion of the sand settling nozzle and feeding pipe of hydrocyclone is, and the service life of hydrocyclone is shorter. The separator of LDHB tailing cyclone is lined with polyurethane, which improves the service life of the whole device, and can complete slurry concentration and liquid clarification smoothly.
Please write down your requirement and contact details in the following form. You can also send a message to us by this email@example.com, we will reply to you within 24 hours.