Quartz Silica Sand Process Plant Introduction

Quartz silica sand is a hard, wear-resistant, and chemically stable silicate mineral. Its main mineral component is SiO2. The color of quartz sand is milky white or colorless and translucent, with a hardness of 7, which is brittle and has no cleavage. Shaped fracture, grease luster, density 2.65, bulk density (1-20 mesh is 1.6-1.8), 20-200 mesh is 1.5, its chemical, thermal and mechanical properties have obvious anisotropy, insoluble in acid, slightly soluble in KOH solution, melting point 1750 °C.


Due to the unique physical and chemical properties of quartz silica sand, it has high-temperature resistance, low thermal expansion coefficient, high insulation, corrosion resistance, piezoelectric effect, resonance effect, and unique optical properties. It is mainly used in glass, ceramics, and refractory materials, metallurgy, construction, chemicals, mechanical casting, electronic aerospace, rubber and plastics, coatings, water purification, etc.

Quartz Silica Sand Process Plant
Material: Quartz Silica Sand Ore
Raw Condition: Raw ore is 4-200 mesh. The iron content of the ore is 200ppm, SiO2:99.58%.
Capacity: 100TPH
Requirements for Finished Sand Products: particle size 50-200 mesh, SiO2 content: >99.8%, iron content≦lOOppm.
Tail Waste Discharge Standard: all production water is recycled and tail sludge is reused.

Leave Us A Comment Here

Please write down your requirement and contact details in the following form. You can also send a message to us by this sales@lyldkj.com, we will reply to you within 24 hours.

If you have any question, please click here for live help. If you have any question, please click here for live help.