Our sales and engineering team has received a lot of questions about those questions related to efficiency and productivity from buyers and customers, so in this article, we’re going to share 7 ways to improve efficiency of sand washing machines like the wheel sand washer or spiral sand washer.
1.The cleanliness and mud content of sand are one of the reasons for the decline in the output of sand washing machines. During the cleaning process of the sand washer, it is necessary to prevent impurities from affecting the cleaning effect of the finished product. In addition, it is necessary to prevent materials with high hardness from entering the inside of the machine, which will cause wear to the equipment and reduce the service life.
2.If the liquid level is too low, the cleaning effect cannot be achieved; while the liquid level is too high, water resources are wasted, but the ideal cleaning effect is not achieved, and the ore is likely to overflow. The amount of materials for one-time cleaning must be within the specified range, otherwise it is prone to failure.
3.The production capacity of the sand washing machine is related to the properties of sand and gravel, including the hardness, density, mud content, particle size of the sand and gravel materials. For example, the uneven sand and gravel materials and their own different attributes may affect the processing capacity of the sand washing equipment. The density of the material is directly proportional to the production capacity of the sand washing machine. The influence of mud content and ore size is mainly reflected in the viscosity of the slurry, which reduces the viscosity and increases the sedimentation speed of mineral particles. The processing capacity and classification accuracy of the sand washing machine will be better.
4.The sand washer should be placed in a suitable location, it can be placed on a flat ground, or placed at a high place, but the plane must be hard enough, and it must not be placed close to the water source. These places are prone to collapse. Cause unnecessary production troubles. In addition, there must be sufficient production space to ensure stable material transportation and production, and sufficient storage space for machine-made sand after cleaning to avoid secondary pollution.
5.According to our research, more than 60% of low or affected production capacity may be caused by the error or Illegal operation. Poor technical level will affect the normal operation of the equipment, and will greatly reduce the production efficiency of the sand washing machine. In some cases, those wrong operations may even break the equipment.
Please write down your requirement and contact details in the following form. You can also send a message to us by this firstname.lastname@example.org, we will reply to you within 24 hours.